AIM Sports Cantilever Scope Mount (Height: 1.5 / 30mm)

AIM SPORTS CANTILEVER SCOPE MOUNT – 30MM / 1.5-INCH / BLACK

30MM SCOPE TUBES • 1.5-INCH LISTED HEIGHT • ANODIZED 6061 ALUMINUM • TWIN RECOIL LUGS

Position your compatible optic with the AIM Sports Cantilever Scope Mount – 30mm / 1.5-inch. Its forward-offset design provides another placement option when setting up a scope on a compatible rail.

The Black mount combines 6061 aluminum construction with twin recoil lugs and a wide rail-contact area. Check scope diameter, rail fit and clearance before ordering.

FORWARD-OFFSET SCOPE POSITIONING

The cantilever design places the scope rings forward of the mounting base. This can help position an optic where available rail space limits a conventional ring arrangement.

The mount changes scope placement, not the optic’s specified eye relief. Final positioning depends on your scope, stock adjustment and normal viewing position.

30MM TUBE COMPATIBILITY

This version is designed for 30mm scope tubes. Check the main tube diameter rather than the objective lens size when selecting a mount.

The listed height is 1.5 inches. Confirm the manufacturer’s measurement reference when assessing cheek position, objective clearance or compatibility with other sights.

6061 ALUMINUM CONSTRUCTION

The mount uses 6061 aluminum with a black anodized finish, providing a metal structure and a subdued exterior.

Surface wear can occur with handling and installation. Follow the manufacturer’s care and tightening instructions to help preserve the mount and scope.

TWIN RECOIL LUGS & RAIL CONTACT

Twin recoil lugs engage a compatible rail, while the wide contact area forms the mounting base.

The supplied information identifies compatibility with standard 20mm accessory rails. Verify the exact rail profile and slot dimensions rather than assuming every rail described as 20mm will fit.

Secure mounting and retained alignment depend on correct fit, installation and the condition of the complete setup.

MOUNT HIGHLIGHTS

• Cantilever layout: forward-offset scope positioning.
• 30mm rings: for compatible 30mm main tubes.
• 1.5-inch listed height: verify the measurement reference for your setup.
• 6061 aluminum: black anodized construction.
• Twin recoil lugs: rail engagement with a wide contact area.

FREQUENTLY ASKED QUESTIONS

What scope tube size does it accept?

This version is designed for a 30mm main tube. Objective lens diameter is a separate measurement.

Will a 1-inch scope tube fit?

Not directly. A 1-inch tube differs from a 30mm tube. No reducer inserts are identified in the supplied information.

Does the mount increase eye relief?

It changes where the scope sits on the rifle. It does not change the eye relief designed into the optic.

Will it fit any 20mm rail?

Universal compatibility is not guaranteed. Confirm the rail profile, slot dimensions and mounting clearance.

Is a scope included?

A scope is not identified as included. This listing is for the mount.

INSTALLATION & COMPATIBILITY NOTE

Check tube diameter, mounting height, objective clearance and rail fit before installation.

Follow AIM Sports’ torque specifications and your optic manufacturer’s mounting instructions. Overtightening can damage the scope tube or mounting hardware.

After installation, check secure attachment and confirm the optic’s alignment and zero before use.

AIM SPORTS // 30MM CANTILEVER MOUNT

The AIM Sports Cantilever Scope Mount – 30mm / 1.5-inch / Black combines forward-offset positioning with anodized aluminum construction.

Choose it when its tube size, height and rail interface match your planned optic setup.