ANGEL CUSTOM G2 6.01MM INNER BARREL – 430MM / VSR-10
SUS304 STAINLESS STEEL • 430MM LENGTH • 6.01MM BORE • VSR-STYLE HOP-UP INTERFACE
Replace your compatible rifle’s inner barrel with the Angel Custom G2 SUS304 Stainless Steel 6.01mm Inner Barrel – 430mm. This version combines a tightbore passage with machined mounting features and a polished internal finish.
Confirm the required length, barrel cuts and bucking compatibility before ordering. A VSR-style designation alone does not guarantee fit with every rifle or chamber.
430MM BARREL CONFIGURATION
This listing is for the 430mm version. Compare that length with your original inner barrel and the space available inside the outer barrel.
Shorter rifle configurations, including some G-Spec models, may require a different length or additional clearance. Do not assume that a listed platform family confirms the correct length for every variant.
6.01MM TIGHTBORE
The listed internal diameter is 6.01mm. This leaves limited clearance around suitable 6mm airsoft BBs, making ammunition quality and barrel cleanliness important.
A tighter bore can change muzzle velocity, but the result depends on the complete compression and barrel setup. A fixed FPS gain, accuracy improvement or range increase is not guaranteed.
SUS304 STAINLESS STEEL CONSTRUCTION
The barrel is made from SUS304 stainless steel, providing corrosion-resistant metal construction.
The supplied information identifies CNC machining, surface polishing and a tapered crown. These finishing features do not establish a guaranteed grouping or service life.
Material choice alone does not determine barrel quality. Straightness, internal finish, alignment and hop-up fit also matter.
VSR-STYLE HOP-UP INTERFACE
Machined channels and an angled hop window form part of the interface with a compatible hop-up assembly.
The supplied compatibility information references selected Tokyo Marui VSR-10, WELL, HFC VSR-11 and JG BAR-10 applications. Verify the exact model and production version individually.
Check barrel length, mounting cuts, window geometry and bucking fit before installation.
G2 430MM HIGHLIGHTS
- 430mm length: this listing’s selected configuration.
- 6.01mm bore: tightbore internal diameter.
- SUS304 stainless steel: corrosion-resistant construction.
- Machined mounting features: intended for compatible VSR-style assemblies.
- Polished bore and tapered crown: listed finishing details.
FREQUENTLY ASKED QUESTIONS
What length is this barrel?
This version is 430mm long.
What is the bore diameter?
The listed internal diameter is 6.01mm.
Will it fit every VSR-10 or BAR-10?
No. Confirm the exact rifle’s required length, barrel cuts and hop-up arrangement. Variants within the same family can differ.
Will it fit a G-Spec configuration?
Check the original barrel length and available clearance. A 430mm barrel should not be assumed to fit every shorter G-Spec arrangement.
Will it add 20–50 FPS?
No fixed increase is guaranteed. Output depends on the original barrel, compression system, air seal and ammunition. Chronograph the completed setup.
Does a tighter bore automatically improve accuracy?
No. Accuracy depends on the complete system, including hop-up alignment, bucking condition, BB quality and consistency.
Is a bucking or hop-up chamber included?
Neither is identified as included in the supplied information. This listing is for the inner barrel.
INSTALLATION & CARE NOTE
Follow the relevant manufacturer’s fitting and cleaning instructions. Use suitable, high-quality BBs and keep the bore free of dirt and debris.
After installation, check barrel seating, feeding and hop-up adjustment. Chronograph with your intended BB weight before gameplay and follow your field’s muzzle-energy limits.
ANGEL CUSTOM // G2 430MM VSR INNER BARREL
The Angel Custom G2 6.01mm Inner Barrel – 430mm combines stainless steel construction with a tightbore passage and machined hop-up interface.
Choose it when its verified length and barrel geometry match your VSR-style rifle setup.

Reviews
There are no reviews yet.