EMG Daniel Defense Licensed DDM4 V7P Pistol AEG Airsoft Rifle w/ Edge II Gearbox and Kestrel V2 ETU (Color: Black)

EMG × DANIEL DEFENSE

DDM4 V7P // EDGE II + KESTREL V2

LICENSED DANIEL DEFENSE • MFR 9″ M-LOK • EDGE II GEARBOX • E-SHOOTER ETU • CNC STEEL GEARS • FOLDING STOCK

EMG × DANIEL DEFENSE // DDM4 V7P // BLACK // ADVANCED AEG ELECTRONICS // LICENSED MFR PLATFORM

The EMG x Daniel Defense DDM4 V7P Pistol AEG Airsoft Rifle with Edge II Gearbox and Kestrel V2 ETU – Black brings together authentic Daniel Defense styling and a significantly upgraded electronic AEG drivetrain.

Externally, it features a licensed aluminum-alloy receiver, authentic roll marks and laser engravings, 9-inch Daniel Defense MFR M-LOK handguard, uninterrupted Picatinny top rail, APS Hawk backup sights, EMG Alpha 19 grip, and compact APS RS3 folding stock.

Internally, the story gets even more interesting.

EMG and APS pair the rifle with the Edge II gearbox, CNC steel gearing, full-steel-tooth piston, high-torque motor, metal adjustable hop-up, Micro FET architecture, and a pre-installed E-Shooter Kestrel V2 ETU.

This isn’t simply a licensed Daniel Defense AEG.

It’s a modern electronic platform from the inside out.

DANIEL DEFENSE

AUTHENTIC LICENSED ARCHITECTURE.

The DDM4 V7P begins with a:

LICENSED ALUMINUM-ALLOY RECEIVER

finished in weather-resistant matte black and detailed with authentic-style Daniel Defense roll marks, engravings, and markings.

That licensed treatment continues through the front assembly, creating a cohesive exterior rather than pairing a branded receiver with generic furniture.

The result is a clean, premium interpretation of the DDM4 V7P configuration.

MFR 9″

DANIEL DEFENSE M-LOK FRONT END.

Surrounding the barrel is a licensed:

9″ MFR M-LOK HANDGUARD

constructed from aluminum.

M-LOK interfaces run throughout the handguard, providing mounting positions for appropriately compatible airsoft accessories without surrounding the entire front end in permanent rail sections.

The handguard also incorporates:

THREE AMBIDEXTROUS QD SLING POINTS

providing multiple attachment locations for compatible QD sling hardware.

Above it all is an uninterrupted Picatinny top rail running across the upper assembly, creating generous mounting space for compatible airsoft optics.

APS Hawk backup sights are included from the factory.

EDGE II

THE GEARBOX AT THE HEART OF THE V7P.

Inside sits the:

APS EDGE II GEARBOX

developed around improved electrical efficiency, reinforced components, and broad upgrade potential.

A Micro FET is incorporated into the gearbox architecture to help manage electrical operation between shots. APS lists the system at approximately 11 amps around a 380 FPS configuration, although actual electrical draw and muzzle output can vary depending on battery, configuration, internal setup, and testing conditions.

The Edge II is also designed for compatibility with many standard aftermarket ETU systems, giving the gearbox a useful foundation for future servicing or electronics replacement.

Exact aftermarket compatibility should always be verified before purchase or installation.

KESTREL V2

ELECTRONIC CONTROL // FACTORY INSTALLED.

The V7P comes with a pre-installed:

E-SHOOTER KESTREL V2 ETU

bringing a much more advanced electronic control system to the platform.

The Kestrel provides features including:

PRE-COCKING

ACTIVE BRAKING

SHORT-CIRCUIT PROTECTION

LOW-BATTERY PROTECTION

and:

BRUSHLESS MOTOR SUPPORT

The ETU also supports programmable operating configurations including semi-auto, binary, and three-round burst, subject to the current firmware/configuration and applicable field rules.

Programming and configuration should follow the current E-Shooter documentation rather than relying on instructions intended for another ETU version.

STEEL DRIVETRAIN

BUILT BEHIND THE ELECTRONICS.

The electronic system is supported by a substantial mechanical package.

Inside the Edge II gearbox is an:

18:1 CNC STEEL GEARSET

paired with a:

FULL-STEEL-TOOTH PISTON

The supplied configuration also includes a stainless-steel ported cylinder and aluminum cylinder head with double O-rings.

Together, these components form the mechanical foundation behind the rifle’s electronic trigger system.

AER033

HIGH-TORQUE MOTOR.

Driving the gearbox is an:

AER033 HIGH-TORQUE MOTOR

APS lists the platform at up to approximately 700 RPM using an 8.4V battery under its stated configuration.

Actual cycle rate can vary considerably depending on battery condition, voltage, drivetrain condition, internal configuration, and other factors.

Battery selection should always follow the specifications recommended for the installed Edge II and Kestrel V2 electronics.

METAL HOP-UP

ADJUSTABLE FROM THE FACTORY.

The DDM4 V7P includes a:

METAL ADJUSTABLE HOP-UP

allowing hop effect to be configured for the BBs being used.

As with any AEG, consistent performance depends on the complete system. Hop adjustment, BB quality and weight, bucking condition, barrel cleanliness, air seal, and drivetrain consistency all contribute to the final result.

RS3 // COMPACT REAR ARCHITECTURE

At the rear, the conventional M4 stock arrangement is replaced by an:

APS RS3 RETRACTABLE FOLDING STOCK

giving the V7P a distinctive compact appearance.

Up front at the controls, an EMG Alpha 19 ergonomic pistol grip complements the modern receiver and stock design.

Together, the RS3 and Alpha 19 help visually separate this configuration from a conventional M4 AEG.

450 ROUNDS

EMG HIGH-CAPACITY MAGAZINE INCLUDED.

The package includes an:

EMG 450-ROUND HIGH-CAPACITY MAGAZINE

providing substantial factory BB capacity in a familiar M4-style format.

Additional magazine fit and feeding can vary by manufacturer, so exact compatibility should be confirmed when adding spare magazines.

DDM4 V7P // CORE BUILD

Licensed Daniel Defense Receiver
Aluminum alloy with authentic markings.

9″ MFR Handguard
Aluminum M-LOK construction.

Edge II Gearbox
Modern APS electronic gearbox architecture.

E-Shooter Kestrel V2 ETU
Programmable electronic control and protection features.

18:1 CNC Steel Gears
Factory-installed drivetrain.

Full-Steel-Tooth Piston
Reinforced piston architecture.

AER033 High-Torque Motor
Matched to the Edge II drivetrain.

Metal Adjustable Hop-Up
Factory-installed adjustment system.

RS3 Folding Stock
Compact retractable rear configuration.

450rd EMG Magazine
High-capacity magazine included.

ELECTRONICS + COMPATIBILITY NOTE

The Edge II and Kestrel V2 create a more advanced electronic platform than a conventional mechanical-trigger AEG. Battery specifications, ETU programming, servicing, and replacement components should follow current APS and E-Shooter documentation.

Although the Edge II is designed around broad aftermarket potential, exact compatibility with third-party ETUs and internal components should always be confirmed before installation.

EMG × DANIEL DEFENSE DDM4 V7P

LICENSED OUTSIDE // ADVANCED INSIDE.

The EMG x Daniel Defense DDM4 V7P Pistol AEG with Edge II Gearbox and Kestrel V2 ETU – Black combines authentic licensed styling with an unusually comprehensive electronic and mechanical package.

Its Daniel Defense aluminum receiver, licensed 9″ MFR M-LOK handguard, Edge II gearbox, Kestrel V2 ETU, 18:1 CNC steel gears, steel-tooth piston, AER033 high-torque motor, metal adjustable hop-up, uninterrupted Picatinny rail, APS Hawk sights, Alpha 19 grip, RS3 folding stock, and 450-round magazine create an AEG designed around much more than appearance alone.

For customers searching for an EMG Daniel Defense DDM4 V7P airsoft rifle, Daniel Defense AEG, Edge II gearbox airsoft gun, Kestrel V2 ETU AEG, MFR M-LOK airsoft rifle, EMG DDM4 V7P Canada, or advanced electronic M4 AEG, this licensed V7P brings premium exterior construction and sophisticated electronic control together in one distinctive platform.

DDM4 V7P // EDGE II

DANIEL DEFENSE LICENSED // KESTREL V2 // CNC STEEL DRIVETRAIN // MFR 9″ M-LOK