EMG x KNIGHT’S ARMAMENT COMPANY PDW M2
COMPACT GAS BLOWBACK AIRSOFT RIFLE // BLACK
OFFICIALLY LICENSED KAC • OPEN-BOLT GBB • 6″ KEYMOD HANDGUARD • FOLDING STOCK • AMBIDEXTROUS CONTROLS • EXTRA MAGAZINE PACKAGE
EMG // KNIGHT’S ARMAMENT COMPANY // KAC PDW M2 // GAS BLOWBACK // 400 FPS // GREEN GAS // EXTRA MAGAZINE
Compact proportions. Official Knight’s Armament identity. Mechanical open-bolt gas blowback.
The EMG x Knight’s Armament Company PDW M2 Compact Gas Blowback Airsoft Rifle brings one of KAC’s most distinctive compact rifle designs into a fully licensed airsoft GBBR platform.
This configuration combines laser-engraved Knight’s Armament trademarks, an open-bolt gas blowback system, side-folding skeletonized stock, ambidextrous controls, monolithic upper receiver, 6″ KeyMod handguard, full-length 20mm top rail, flip-up sights, and an updated REAPS-style hop-up interface.
This exact listing is the:
BLACK // 400 FPS // GREEN GAS // ADD EXTRA MAGAZINE
configuration, giving you the compact KAC PDW M2 along with an additional compatible magazine.
KNIGHT’S ARMAMENT
OFFICIALLY LICENSED KAC IDENTITY.
This isn’t simply a generic compact rifle wearing PDW-style furniture.
The platform is:
FULLY LICENSED BY KNIGHT’S ARMAMENT COMPANY
and features laser-engraved KAC trademarks.
Those details work together with the distinctive monolithic upper, short front end, folding stock, and compact receiver architecture to create a highly recognizable replica of the Knight’s Armament PDW design.
For collectors in particular, the official branding gives this platform an identity that generic PDW-style GBBRs cannot duplicate.
PDW M2
BUILT AROUND COMPACT PROPORTIONS.
The defining characteristic of the KAC PDW is its compact architecture.
A short front assembly is paired with a:
SIDE-FOLDING SKELETONIZED STOCK
allowing the rear profile to become significantly more compact when folded.
Unlike AR-pattern designs built around a traditional fixed buffer-tube arrangement, the folding stock is an integral part of the PDW’s distinctive silhouette.
A:
REAR QD SLING POINT
is also integrated into the rear configuration for appropriately compatible airsoft sling hardware.
OPEN-BOLT GBB
MECHANICAL CYCLING & RECOIL FEEDBACK.
At the centre of the platform is an:
OPEN-BOLT GAS BLOWBACK SYSTEM
designed to provide mechanical cycling and noticeable recoil feedback during operation.
The result is a very different experience from an electric PDW.
Rather than an internal gearbox providing the primary operating action, the GBB system physically cycles during each shot.
Gas performance can vary with ambient temperature, magazine temperature, gas condition, seals, maintenance, and firing pace, so operating characteristics should always be evaluated under the conditions in which the rifle will actually be used.
MONOLITHIC UPPER
ONE DISTINCTIVE RECEIVER ARCHITECTURE.
One of the strongest visual features of the PDW M2 is its:
MONOLITHIC UPPER RECEIVER
paired with a compact:
6″ KEYMOD HANDGUARD
The upper configuration creates a clean, continuous appearance while providing mounting space for appropriately compatible airsoft accessories.
Running along the top is a:
FULL-LENGTH 20MM RAIL
providing a familiar mounting interface for compatible airsoft optics and mounts.
The KeyMod handguard also provides modular mounting positions without surrounding the entire front end with permanent rail sections.
AMBIDEXTROUS
MODERN CONTROL ARCHITECTURE.
The PDW M2 incorporates:
AMBIDEXTROUS FIRE CONTROLS + MAGAZINE CATCH
making the control layout accessible from either side of the receiver.
This design is an important part of the PDW M2’s modern architecture and complements the compact folding-stock configuration.
REAPS-STYLE HOP SYSTEM
UPDATED INNER-BARREL INTERFACE.
Internally, this version uses an updated:
REAPS-STYLE HOP-UP CUTOUT & BUCKING
designed around the current inner-barrel configuration.
This is particularly important when considering replacement or aftermarket components.
The updated system is listed as:
NOT COMPATIBLE WITH THE PREVIOUS-VERSION HOP BUCKING
so parts should be selected specifically for this generation rather than assuming compatibility with earlier PDW versions.
As always, practical range, grouping, and consistency depend on the complete system—including BB quality, hop adjustment, barrel condition, gas consistency, seals, and environmental conditions.
GREEN GAS + CO2
MAGAZINE OPTIONS FOR THE PLATFORM.
The supplied specifications identify the PDW M2 platform as compatible with both:
GREEN GAS MAGAZINES
and
CO2 MAGAZINES
when using the appropriate compatible magazine configuration.
This particular package is configured as the:
GREEN GAS VERSION + EXTRA MAGAZINE
Changing between gas and CO2 magazine types can affect operating characteristics and muzzle output. Use only manufacturer-approved magazine configurations and chronograph the rifle whenever the power-source configuration changes.
FLIP-UP SIGHTS
Included from the factory are:
FRONT + REAR FLIP-UP IRON SIGHTS
providing a complete sighting arrangement while preserving the top rail for compatible airsoft optics.
The folding design also keeps the sights lower-profile when an appropriate optic is installed.
400 FPS
VERIFY YOUR FIELD LIMIT.
This particular configuration is listed at approximately:
400 FPS
Actual muzzle velocity can vary according to BB weight, gas type, magazine temperature, seals, internal condition, and chronograph procedure.
Because approximately 400 FPS may exceed the rifle or CQB limits of some airsoft fields, always chronograph the PDW before play and confirm the applicable local field rules.
Its compact size does not automatically mean it meets CQB velocity limits.
THE KAC PDW M2 FORMULA
Official Knight’s Armament Licensing — authentic laser-engraved KAC trademarks.
Open-Bolt Gas Blowback — mechanically cycling GBB action.
Side-Folding Stock — compact skeletonized rear configuration.
Monolithic Upper Receiver — distinctive PDW architecture.
6″ KeyMod Handguard — compact modular front end.
Full-Length 20mm Rail — compatible optics mounting surface.
Ambidextrous Controls — accessible control arrangement.
REAPS-Style Hop System — updated barrel and bucking architecture.
Green Gas + CO2 Magazine Compatibility — manufacturer-listed power-source options.
Extra Magazine Package — additional magazine included with this configuration.
GBB // MAGAZINE & COMPATIBILITY NOTE
The PDW M2 is listed as supporting compatible WE / RA-Tech / NPAS-family aftermarket components and magazines; however, exact compatibility can vary by component generation and manufacturer revision. Verify individual parts before purchase rather than assuming universal drop-in compatibility.
The updated REAPS-style hop-up architecture is particularly important because previous-version hop buckings are not compatible with this configuration.
Use manufacturer-approved gas or CO2 magazine configurations and always chronograph after changing the power source or internal setup.
EMG x KNIGHT’S ARMAMENT PDW M2
LICENSED KAC DETAIL IN A COMPACT GAS BLOWBACK PLATFORM.
The EMG x Knight’s Armament Company PDW M2 Compact Gas Blowback Airsoft Rifle – Black / 400 FPS / Green Gas / Add Extra Magazine combines official KAC identity with a distinctive compact GBBR architecture.
Its laser-engraved Knight’s Armament trademarks, open-bolt gas blowback system, monolithic upper receiver, 6″ KeyMod handguard, side-folding skeletonized stock, ambidextrous controls, full-length top rail, flip-up sights, updated REAPS-style hop system, and extra Green Gas magazine package create a highly distinctive alternative to a conventional full-size AR-pattern GBBR.
For customers searching for an EMG KAC PDW M2, Knight’s Armament PDW airsoft rifle, KAC gas blowback rifle, compact open-bolt GBBR, KeyMod PDW airsoft rifle, EMG Knight’s Armament GBB, or KAC PDW M2 Canada, this configuration delivers official licensing, compact proportions, and mechanical gas blowback character in one complete package.

Reviews
There are no reviews yet.