RAPAX LIGHT PULL

PRECISION AIRSOFT SNIPER SPRING // APS2-STYLE PLATFORM

LIGHTER BOLT PULL • 13MM OD • REDUCED TWANG • CORROSION-RESISTANT COATING • MULTI-PLATFORM COMPATIBILITY

RAPAX SPRING // RAPAX LIGHT PULL // SRS SPRING // TAC41 SPRING // SSG10 SPRING // VSR SPRING // APS2 AIRSOFT SNIPER SPRING

LIGHT PULL // WITHOUT THE GENERIC SPRING FEEL.

The RAPAX Light Pull Airsoft Sniper Spring for SRS, TAC41, SSG10, SSG24, SSG96, VSR and compatible APS2-style spring platforms is engineered around a simple idea:

MAKE THE SPRING SYSTEM FEEL MORE REFINED.

Rather than focusing only on output, RAPAX concentrates on the characteristics that affect the mechanical feel of a spring-powered airsoft platform—bolt-pull resistance, spring vibration, consistency, material quality and dimensional control.

The result is a specialized upgrade component available in several energy-rated versions for compatible bolt-action airsoft platforms.

For builders looking specifically for a lighter-pull APS2-style sniper spring, RAPAX offers a far more purpose-driven solution than a generic replacement spring.

LIGHTER PULL

THE DEFINING RAPAX CHARACTERISTIC.

The RAPAX Light Pull series is designed to provide:

REDUCED BOLT-PULL RESISTANCE.

That is particularly noticeable on spring-powered bolt-action platforms where the spring is compressed manually as part of the rifle’s operating cycle.

RAPAX achieves its intended characteristics through the spring’s overall design rather than simply positioning the product as another generic high-output spring.

The goal is a smoother, more manageable mechanical feel while maintaining the rated characteristics of the selected spring version.

Actual results will depend on the complete rifle configuration.

LESS TWANG

CONTROL THE VIBRATION.

Spring vibration can produce the familiar:

“TWANG”

heard from many spring-powered airsoft rifles.

RAPAX specifically engineers the Light Pull series to reduce unwanted vibration and provide a quieter, more controlled spring cycle.

That refinement comes from tightly controlled spring dimensions and consistent manufacturing across the series.

A spring is only one component of the overall system, so final sound and mechanical characteristics can still vary depending on the spring guide, piston, cylinder and other internal components.

CONSISTENT ARCHITECTURE

SAME FOUNDATION ACROSS THE SERIES.

RAPAX manufactures the different Light Pull versions around a controlled design architecture.

Across the series, RAPAX specifies consistent:

OVERALL LENGTH

COIL COUNT

and:

MATERIAL COMPOSITION.

The power variants are engineered as part of the same product family rather than being unrelated springs sharing the same name.

That consistency makes the RAPAX range particularly appealing when selecting components for compatible precision-oriented airsoft builds.

13MM

APS2-STYLE COMPATIBILITY.

The RAPAX spring has an approximate:

13MM OUTER DIAMETER.

It is designed for compatibility with a broad range of airsoft bolt-action platforms using compatible APS2-style spring dimensions.

Listed platforms include:

SILVERBACK SRS

SILVERBACK TAC41

NOVRITSCH SSG10

NOVRITSCH SSG24

NOVRITSCH SSG96

VSR-STYLE PLATFORMS

and other compatible systems using the appropriate APS2-style spring architecture.

Compatibility should still be confirmed against the exact rifle and internal configuration before purchase.

MULTIPLE ENERGY OPTIONS

CHOOSE FOR THE PLATFORM + LOCAL LIMITS.

The RAPAX Light Pull family is offered in multiple nominal energy classes, including versions identified around:

2J

2.8J

3J

4J

These figures should be treated as model designations / nominal performance targets, not guaranteed output from every rifle.

Actual muzzle energy can vary significantly depending on the airsoft platform, barrel, air seal, piston system, BB weight, hop-up configuration and other internal factors.

Always verify actual output with a chronograph and comply with the limits applicable to your field, event and location.

COATED

CORROSION RESISTANCE BUILT IN.

RAPAX uses an:

ELECTRICALLY APPLIED PROTECTIVE COATING

to help protect the spring against corrosion.

The coating also contributes to a smoother finished surface compared with untreated spring steel.

For an internal component exposed to repeated compression cycles, material finish and corrosion resistance are meaningful considerations for long-term service.

SRS // TAC41 // SSG // VSR

ONE SPRING FAMILY. MULTIPLE PLATFORMS.

One of the major strengths of the RAPAX series is its broad compatibility with popular airsoft sniper platforms.

Instead of being tied to a single rifle, the 13mm APS2-style architecture allows the spring family to support multiple compatible systems.

That makes RAPAX especially useful for owners of platforms such as the Silverback SRS and TAC41, as well as compatible SSG and VSR-style airsoft rifles.

Exact internal dimensions can vary between models and aftermarket configurations, so platform compatibility should always be confirmed before selecting a replacement spring.

RAPAX // COMPONENT ARCHITECTURE

Brand: RAPAX

Product Type: Airsoft Sniper Spring

Series: Light Pull

Outer Diameter: Approximately 13mm

Architecture: APS2-Style

Design Focus: Reduced Pull Resistance / Reduced Vibration

Surface Treatment: Electrically Applied Corrosion-Resistant Coating

Available Nominal Classes: 2J / 2.8J / 3J / 4J

Listed Platforms: SRS / TAC41 / SSG10 / SSG24 / SSG96 / VSR / Compatible APS2 Systems

ENERGY RATING

VERIFY THE ACTUAL RIFLE.

A spring’s nominal rating does not determine the final muzzle energy by itself.

Air seal, cylinder volume, barrel configuration, piston components, BB weight and other factors can change the measured result.

For that reason, the completed airsoft rifle should always be chronographed after internal changes and checked against the applicable field and local energy limits before use.

Higher-rated versions may exceed the limits permitted by many airsoft fields.

COMPATIBILITY

APS2-STYLE DOESN’T MEAN UNIVERSAL.

The RAPAX Light Pull is compatible with a wide range of popular platforms, but individual airsoft rifles can contain factory revisions or aftermarket internal components that alter fitment.

Always verify the exact rifle model and internal spring specification before selecting a replacement.

RAPAX

LIGHT PULL // PRECISION SPRING SERIES.

The RAPAX Light Pull Spring for SRS, TAC41, SSG10, SSG24, SSG96, VSR and compatible APS2-style airsoft rifles takes an often-overlooked internal component and treats it like part of a precision system.

With its lighter-pull design, approximately 13mm outer diameter, controlled coil architecture, reduced vibration and spring twang, corrosion-resistant electrical coating, consistent construction and broad APS2-style platform compatibility, the RAPAX series provides a specialized spring option for compatible bolt-action airsoft platforms.

For customers searching for a RAPAX spring, RAPAX Light Pull spring, SRS spring, TAC41 spring, SSG10 spring, SSG24 spring, SSG96 spring, VSR spring, APS2 airsoft sniper spring, or RAPAX spring Canada, the Light Pull series offers a refined alternative to generic replacement springs—with multiple nominal energy classes available to suit compatible platforms and applicable field limits.

RAPAX // LIGHT PULL

13MM // APS2 STYLE // REDUCED TWANG // MULTI-PLATFORM

LIGHTER MECHANICAL PULL. // REFINED SPRING ARCHITECTURE.