WOLVERINE AIRSOFT INFERNO XTS

PREMIUM HPA ENGINE // BLINC BLUETOOTH FCU

EXTENDED STROKE • STAINLESS STEEL NOZZLE • INDEPENDENT POPPET + NOZZLE • BLINC WIRELESS CONTROL

INFERNO XTS // PREMIUM HPA ENGINE // BLINC BLUETOOTH FCU // EXTENDED STROKE // INTEGRATED FILTERED LINE // WOLVERINE AIRSOFT

THE NEXT GENERATION OF INFERNO.

The Wolverine Airsoft INFERNO XTS Premium HPA Engine with BLINC Bluetooth FCU takes the architecture behind the proven INFERNO Gen 2 and pushes it into a more refined generation.

The XTS isn’t simply a renamed Gen 2.

Wolverine has reworked key areas of the firing cycle, nozzle assembly, airflow architecture, servicing design, and electronic control system to create an HPA engine focused on consistent operation, broader setup flexibility, easier servicing, and advanced digital control.

At the centre of the package is Wolverine’s independent poppet-and-nozzle architecture—now paired with the Extended Stroke system and the powerful BLINC Bluetooth FCU.

MECHANICAL REFINEMENT. // DIGITAL CONTROL.

XTS

EXTENDED STROKE ARCHITECTURE.

One of the defining changes in the INFERNO XTS is Wolverine’s:

EXTENDED STROKE SYSTEM.

The independent poppet and nozzle architecture separates the loading and firing movements within the operating cycle.

For the XTS, Wolverine has increased that separation to provide additional forgiveness during BB loading and improve the relationship between chambering, sealing, and firing.

The result is an evolution of the hybrid technology established by the INFERNO Gen 2, refined around the demands of modern HPA airsoft builds.

STAINLESS STEEL

A REDESIGNED NOZZLE.

The XTS introduces a newly designed:

STAINLESS STEEL NOZZLE.

The additional nozzle mass increases inertia during BB loading, helping provide more consistent chambering within compatible configurations.

It’s a seemingly small component change with an important purpose: improve the mechanical consistency of the loading stage before the firing cycle begins.

Combined with the Extended Stroke architecture, the nozzle forms an important part of the XTS’s redesigned operating system.

DELRIN

ONE-PIECE BAFFLE.

Wolverine has also simplified another critical area of the engine.

The XTS incorporates a:

ONE-PIECE DELRIN® BAFFLE.

The one-piece construction is designed to reduce friction and wear while also eliminating a common servicing mistake associated with more complicated component arrangements.

For owners who regularly maintain their HPA equipment, that’s an important improvement.

Fewer opportunities for incorrect reassembly.

Less unnecessary friction.

A cleaner service architecture.

DIRECT SOLENOID

SIMPLE. FAST. PROVEN.

The INFERNO XTS retains Wolverine’s:

DIRECT SOLENOID-FIRED DESIGN.

This architecture is designed around a direct electronic firing system with durable, serviceable components rather than unnecessary mechanical complexity.

The result is an engine built around the qualities the INFERNO platform is known for:

RESPONSIVE OPERATION

SERVICEABILITY

DURABILITY

and:

CONSISTENT CYCLING

AIRFLOW

REFINED FROM THE INSIDE.

The XTS uses a redesigned valve housing engineered to improve internal airflow and reduce unnecessary air waste.

Wolverine has also built greater tolerance into the system’s dwell characteristics, giving the XTS a broader operating window across compatible configurations.

Optional flow reducers provide additional airflow-management options for applications requiring lower-energy configurations, with three reducer levels available.

Exact setup and configuration should always follow Wolverine Airsoft’s current documentation and applicable field energy requirements.

FILTERED LINE

PROTECTION BUILT IN.

The engine incorporates an:

INTEGRATED FILTERED LINE.

HPA systems rely on clean, controlled airflow, and the integrated filter provides an additional layer of protection for the engine’s pneumatic system.

It’s another detail that reflects the XTS philosophy:

Refine the system.

Protect the components.

Keep servicing straightforward.

BLINC

THE FCU HAS CHANGED.

The BLINC isn’t just a conventional fire-control unit.

It combines:

FCU + TRIGGER BOARD

into a Bluetooth-enabled control platform designed specifically around modern Wolverine HPA systems.

Using Bluetooth Low Energy connectivity, BLINC communicates wirelessly with Wolverine’s supported app, allowing compatible settings and profiles to be managed digitally.

That means fewer reasons to physically access the FCU simply to review supported electronic settings.

BLUETOOTH

CONTROL FROM THE APP.

BLINC provides access to a broad range of configurable fire-control options.

Depending on the configuration and applicable field rules, supported selector positions can be assigned modes including:

SEMI-AUTO

2–10 ROUND BURST OPTIONS

FULL-AUTO

DMR MODE

BINARY

and other supported configurations.

Profiles can also be created for different setups.

Availability and legality of specific modes depends on the airsoft field, event, region, and platform configuration. Always follow current Wolverine documentation and local field requirements when configuring the system.

ACETECH × BLINC

CONNECTED HPA TECHNOLOGY.

The BLINC system can communicate with compatible Bluetooth-enabled Acetech equipment, including supported devices such as:

BIFROST BT

LIGHTER BT

AC6000 BT

When paired with compatible hardware, BLINC can access additional functionality such as chronograph monitoring, sampling tools, and Wolverine’s supported Auto-Tune functionality.

This integration creates a connected ecosystem where the engine controller and compatible measurement hardware can communicate directly.

Specific compatibility and functionality can change with firmware, app versions, and connected hardware, so current Wolverine and Acetech documentation should always be checked.

SMARTER ELECTRONICS

BUILT TO WATCH THE SYSTEM.

BLINC also incorporates electronic monitoring features including:

FULL-TIME SLEEP MODE

SHORT DETECTION

BATTERY VOLTAGE MONITORING

These features are designed to help manage the electronics behind the scenes while keeping important system information accessible.

It’s a significant step beyond the traditional basic FCU.

XTS // PERFORMANCE ARCHITECTURE

Engine: Wolverine Airsoft INFERNO XTS

Operating System: HPA

Architecture: Independent poppet and nozzle

Stroke System: Extended Stroke

Nozzle: Redesigned stainless steel

Baffle: One-piece Delrin®

Solenoid: Direct solenoid-fired design

Air Line: Integrated filtered line

Airflow Options: Optional three-level flow reducer system

Electronics: BLINC Bluetooth FCU + Trigger Board

Connectivity: Bluetooth Low Energy

External Integration: Compatible supported Acetech Bluetooth devices

Application: Compatible AEG-format HPA conversions

COMPATIBILITY + CONFIGURATION NOTE

The Wolverine Airsoft INFERNO XTS is a technical HPA component and should be installed and configured according to Wolverine Airsoft’s current instructions.

Exact compatibility depends on the host platform, gearbox architecture, nozzle requirements, hop-up configuration, electronics, and other components.

BLINC functions can also depend on current firmware, app versions, connected accessories, and Wolverine-supported configurations.

After installation or servicing, the completed airsoft platform should be function-checked and chronographed before field use to confirm compliance with the applicable field’s energy limits and rules.

INFERNO XTS

MECHANICAL EVOLUTION // BLUETOOTH CONTROL.

The Wolverine Airsoft INFERNO XTS Premium HPA Engine with BLINC Bluetooth FCU represents a major evolution of the INFERNO architecture.

Its Extended Stroke independent poppet-and-nozzle system, redesigned stainless steel nozzle, one-piece Delrin baffle, refined valve housing, direct solenoid design, integrated filtered line, optional flow-control architecture, and BLINC Bluetooth FCU combine mechanical refinement with a significantly more connected electronic platform.

For players searching for a Wolverine INFERNO XTS, Wolverine HPA engine, INFERNO XTS Canada, BLINC Bluetooth FCU, premium HPA engine, Wolverine Airsoft HPA system, or INFERNO Gen 2 alternative, the XTS delivers Wolverine’s next-generation approach to the INFERNO platform.

WOLVERINE AIRSOFT // INFERNO XTS

EXTENDED STROKE // STAINLESS NOZZLE // BLINC BLUETOOTH FCU

THE INFERNO EVOLVED.