POLARSTAR V3 TRIGGER BOARD

UNIVERSAL FOR V3 JACK • F1 • F2 HPA SYSTEMS

V3 GEARBOX COMPATIBILITY • SINGLE & DUAL SOLENOID SUPPORT • JACK • F1 • F2 • POLARSTAR HPA

POLARSTAR // V3 TRIGGER BOARD // JACK // F1 // F2 // HPA // V3 GEARBOX // REPLACEMENT & CONVERSION COMPONENT

Building a PolarStar HPA-powered V3 gearbox platform or replacing an existing trigger board?

The PolarStar V3 Trigger Board provides the electronic interface required for compatible PolarStar JACK, F1, and F2 HPA systems installed in many V3-style gearbox platforms.

Designed to fit most Version 3 gearbox configurations, the board supports both single-solenoid and dual-solenoid PolarStar systems. That makes it a versatile component whether you’re working with the compact JACK, the F1, or the independently controlled dual-solenoid F2.

For HPA builds where the engine is only part of the equation, the correct trigger board is an essential piece of the electronic control system.

BUILT FOR V3

POLARSTAR CONTROL FOR VERSION 3 GEARBOXES.

The defining feature of this trigger board is its:

V3 GEARBOX FORMAT

Version 3 gearboxes are commonly associated with several popular airsoft platform families, but individual gearbox shells and replica designs can still vary.

PolarStar designed this board to drop into most compatible V3-style gearbox shells, giving builders a purpose-built electronic trigger solution for V3 PolarStar installations.

If you’re converting an existing compatible V3 airsoft platform to PolarStar HPA or replacing a damaged board in an established build, this is the V3-specific component designed for the job.

JACK + F1 + F2

ONE BOARD. THREE POLARSTAR ENGINE FAMILIES.

One of the biggest advantages of the PolarStar V3 Trigger Board is its engine compatibility.

The board supports:

POLARSTAR JACK

POLARSTAR F1

POLARSTAR F2

This means you’re not locked into only one of these PolarStar HPA engine designs when choosing the V3 board.

The electronics are designed to accommodate the different solenoid configurations required by these systems while providing the appropriate V3 trigger interface.

SINGLE SOLENOID

JACK & F1 SUPPORT.

Both the PolarStar JACK and F1 use a single-solenoid architecture.

The V3 Trigger Board supports these systems through the appropriate board connection.

This makes the same V3 board suitable for builds using either of PolarStar’s compatible single-solenoid engines rather than requiring an entirely different trigger-board design.

Always follow PolarStar’s current installation documentation for the exact engine and electronics being used.

DUAL SOLENOID

READY FOR THE POLARSTAR F2.

The PolarStar F2 differs from the JACK and F1 because it uses a:

DUAL-SOLENOID SYSTEM

The V3 Trigger Board is designed with the required connections to support the F2’s separate solenoid leads.

This allows the board to interface with the F2’s dual-solenoid architecture while still retaining support for compatible single-solenoid PolarStar engines.

For builders, that makes the board considerably more versatile when working across different PolarStar V3 configurations.

MORE THAN A REPLACEMENT PART

A CORE COMPONENT OF A V3 HPA BUILD.

A trigger board isn’t simply an on/off switch.

Within a compatible electronically controlled PolarStar HPA system, it forms part of the interface between the physical trigger and the system electronics.

That makes the correct board important whether you’re:

Replacing an Existing V3 Trigger Board

Building a New PolarStar V3 Setup

Moving to a JACK

Configuring an F1

Building Around an F2

Choosing the correct gearbox version and engine-compatible electronics helps ensure the components are designed to work together as a complete system.

WHY CHOOSE THE POLARSTAR V3 BOARD?

V3-SPECIFIC DESIGN

Built for installation in most compatible Version 3 gearbox configurations.

JACK COMPATIBLE

Supports PolarStar’s compact single-solenoid JACK engine.

F1 COMPATIBLE

Works with the PolarStar F1 single-solenoid system.

F2 COMPATIBLE

Includes support for the F2’s dual-solenoid architecture.

REPLACEMENT READY

Useful when servicing a compatible existing PolarStar V3 HPA build.

CONVERSION SUPPORT

Provides the appropriate trigger-board architecture when building a compatible V3 platform around a PolarStar HPA engine.

COMPATIBILITY // CHECK YOUR BUILD FIRST

Before ordering, confirm that your airsoft platform uses a compatible Version 3 gearbox configuration and that your PolarStar system is a JACK, F1, or F2 supported by this board.

V3 gearbox shells and airsoft replicas can vary between manufacturers, so “V3” should not automatically be interpreted as universal fitment.

For installation and electronic connections, follow the current PolarStar documentation supplied for your specific engine and electronics. If you’re uncertain about the installation, have the system inspected or installed by an experienced airsoft HPA technician.

POLARSTAR V3 TRIGGER BOARD

THE ELECTRONIC FOUNDATION FOR YOUR V3 JACK, F1 OR F2 BUILD.

The PolarStar V3 Trigger Board – Universal for V3 JACK, F1 and F2 provides a versatile electronic trigger solution for compatible Version 3 HPA airsoft builds.

With support for single-solenoid PolarStar JACK and F1 engines as well as the dual-solenoid PolarStar F2, the board can serve as either a replacement component or an important part of a new compatible V3 HPA conversion.

For customers searching for a PolarStar V3 trigger board, PolarStar F2 V3 trigger board, JACK V3 trigger board, PolarStar F1 trigger board, Version 3 HPA trigger board, PolarStar replacement electronics, or PolarStar V3 trigger board Canada, this genuine PolarStar component provides the compatibility needed to bring the electronic side of a V3 HPA build together.

POLARSTAR / V3 TRIGGER BOARD / JACK / F1 / F2 / SINGLE + DUAL SOLENOID / HPA