WOLVERINE AIRSOFT INFERNO GEN 2

PREMIUM EDITION // MTW NOZZLE

CNC ALUMINUM • INDEPENDENT POPPET + NOZZLE • SINGLE SOLENOID • MTW DIRECT REPLACEMENT ENGINE

INFERNO GEN 2 // PREMIUM EDITION // MTW NOZZLE // WOLVERINE HPA ENGINE // HYBRID ARCHITECTURE // DIRECT MTW REPLACEMENT

THE ENGINE BEHIND THE MTW.

The Wolverine Airsoft INFERNO Gen 2 Premium Edition HPA Airsoft Unit – MTW Nozzle brings Wolverine’s proven Gen 2 HPA architecture directly to the MTW platform.

This isn’t simply a standard INFERNO engine with another nozzle installed.

This specific configuration was developed by Wolverine as a:

DIRECT REPLACEMENT ENGINE FOR THE WOLVERINE MTW.

Built around Wolverine’s single-solenoid architecture and independent poppet-and-nozzle system, the INFERNO Gen 2 combines the advantages associated with open-bolt HPA operation with design characteristics intended to make hop-up interaction and BB loading more consistent.

For MTW owners looking to replace the original engine while maintaining the platform’s intended architecture, this is the purpose-built configuration.

GEN 2

THE HYBRID ARCHITECTURE.

At the heart of the INFERNO Gen 2 is Wolverine’s:

INDEPENDENT POPPET + NOZZLE DESIGN.

Instead of mechanically tying every part of the firing cycle together, the architecture separates key functions of the nozzle and poppet.

Wolverine developed this hybrid system to retain important characteristics of its open-bolt technology while addressing one of the challenges traditionally associated with open-bolt HPA engines: interaction with different hop-up configurations.

The result became the foundation for one of Wolverine Airsoft’s most recognizable HPA engine platforms.

SINGLE SOLENOID

SIMPLICITY AT THE CORE.

The INFERNO Gen 2 uses a:

SINGLE-SOLENOID SYSTEM.

Rather than adding unnecessary complexity, Wolverine built the engine around a direct electronically controlled pneumatic architecture.

The design is intended to provide responsive cycling while keeping the internal system relatively straightforward and serviceable.

That architecture also contributes to the immediate trigger response associated with the INFERNO platform.

NO FIRST-ROUND DRY FIRE

READY FROM THE FIRST CYCLE.

One of the notable characteristics of the Gen 2 design is:

NO FIRST-ROUND DRY FIRE.

The hybrid operating architecture is designed so the system can properly begin its firing sequence without the characteristic initial empty cycle associated with some pneumatic configurations.

For the user, that means the engine’s operating sequence begins as intended from the first cycle.

CNC ALUMINUM

PRECISION-MACHINED CONSTRUCTION.

The INFERNO Gen 2 Premium Edition features:

CNC-MACHINED ALUMINUM CONSTRUCTION.

Precision machining allows Wolverine to maintain the dimensional relationships required within the pneumatic assembly while keeping the engine compact and durable.

It’s an internal component designed to operate repeatedly inside the MTW architecture, where alignment, sealing, and consistent movement all matter.

MTW NOZZLE

BUILT SPECIFICALLY FOR THE PLATFORM.

This version includes the:

MTW NOZZLE CONFIGURATION.

That distinction is critical.

INFERNO engines are available for different platforms and gearbox configurations, and nozzle dimensions are an important part of proper feeding and air seal.

This model is specifically intended to work as a direct replacement engine for the Wolverine MTW Rifle System.

If you’re purchasing an INFERNO Gen 2 for another airsoft platform, do not assume the MTW nozzle configuration is correct.

HOP-UP COMPATIBILITY

A GEN 2 PRIORITY.

Wolverine redesigned the Gen 2 architecture in part to improve its interaction with hop-up systems.

The hybrid independent poppet-and-nozzle design was developed to combine the straightforward characteristics of an open-bolt system with easier hop-up compatibility traditionally associated with closed-bolt architectures.

Proper performance still depends on the complete system—including nozzle alignment, hop-up chamber, bucking, barrel, BB quality, and installation.

INTERNAL GEOMETRY

REFINED FOR EFFICIENCY.

The Gen 2 also introduced:

REDESIGNED INTERNAL GEOMETRY.

According to Wolverine, the redesigned system improved efficiency by an estimated 10–15% compared with its previous-generation systems.

Actual air consumption varies with the complete airsoft configuration and operating conditions, but the engineering goal was clear:

Do more with the airflow available.

SMP TECHNOLOGY

THE WOLVERINE FOUNDATION.

The INFERNO Gen 2 builds on Wolverine’s SMP technology, evolving the company’s earlier pneumatic engine concepts into the independent poppet-and-nozzle architecture used by the Gen 2.

That development helped establish the architecture that would later continue evolving across Wolverine’s HPA ecosystem.

ELECTRONIC CONTROL

CONFIGURABLE PERFORMANCE.

The INFERNO Gen 2 platform supports electronic control over operating characteristics including:

VELOCITY CONFIGURATION

RATE-OF-FIRE SETTINGS

SUPPORTED BURST SETTINGS

The exact available controls depend on the electronics and configuration paired with the engine.

Configuration should always follow current Wolverine documentation, and the completed airsoft platform should be chronographed before field use to verify compliance with applicable energy limits.

INFERNO GEN 2 // PERFORMANCE ARCHITECTURE

Manufacturer: Wolverine Airsoft

Engine: INFERNO Gen 2 Premium Edition

Power System: HPA

Construction: Precision CNC-machined aluminum

Architecture: Hybrid independent poppet and nozzle

Solenoid: Single-solenoid system

Technology: Wolverine SMP-derived architecture

Nozzle Configuration: MTW Nozzle

Platform: Wolverine MTW Rifle System

Hop-Up Design: Improved compatibility architecture

First-Round Operation: No first-round dry fire

Internal Geometry: Gen 2 efficiency-focused redesign

Application: Direct replacement HPA engine for compatible Wolverine MTW systems

MTW COMPATIBILITY // IMPORTANT.

This version of the Wolverine INFERNO Gen 2 Premium Edition is specifically configured with the MTW nozzle and is intended as a replacement engine for compatible Wolverine MTW Rifle Systems.

Do not assume compatibility with other AEGs, gearbox shells, or INFERNO applications simply because they use another version of the INFERNO Gen 2.

Exact compatibility should be confirmed before ordering.

After engine replacement or servicing, the completed airsoft platform should be function-checked and chronographed before field use. Always follow Wolverine’s current documentation and applicable field energy requirements.

INFERNO GEN 2 // MTW

THE PROVEN WOLVERINE HPA ARCHITECTURE.

The Wolverine Airsoft INFERNO Gen 2 Premium Edition HPA Airsoft Unit with MTW Nozzle is a purpose-built replacement engine for the Wolverine MTW platform, combining CNC-machined aluminum construction, single-solenoid operation, independent poppet-and-nozzle architecture, improved hop-up compatibility, redesigned internal geometry, and no first-round dry fire.

Rather than adapting a generic HPA engine to the MTW, this configuration is built around the nozzle requirements and architecture of the platform itself.

For customers searching for a Wolverine INFERNO Gen 2, MTW replacement engine, Wolverine MTW HPA engine, INFERNO Gen 2 Premium Edition, Wolverine MTW nozzle engine, Wolverine HPA engine Canada, or replacement INFERNO engine for MTW, this is the dedicated Gen 2 configuration designed around Wolverine’s Modular Training Weapon platform.

WOLVERINE AIRSOFT // INFERNO GEN 2

PREMIUM EDITION // MTW NOZZLE // DIRECT MTW REPLACEMENT

PROVEN ARCHITECTURE. // BUILT FOR THE MTW.